App To Continuously Scan Wifi Mac 2019

  1. App To Continuously Scan Wifi Mac 2019 Mac
  2. App To Continuously Scan Wifi Mac 2019 Reviews
  3. App To Continuously Scan Wifi Mac 2019 Download
  4. App To Continuously Scan Wifi Mac 2019 Free

The Wi-Fi scan pane offers two metrics to help you determine this: Signal (RSSI, Received Signal Strength Indication) and Noise. The first refers to the strength of the signal between your Mac. Printer is successfully connected to wifi, on the same network as the Mac, it shows up on the Mac printer list and I can print to it wirelessly from the Mac. However, in the HP Smart app, which is required for scanning, Smart Ink etc, it continuously says 'Printer offline'. So I can't scan etc. Oct 28, 2019  WiFi Scanner is the most feature rich and complete WiFi scanning app on the app store and is a great tool for personal use and for IT professionals. All features available on 10.6 and later (Snow Leopard, Lion and Mountain Lion) WiFi Scanner is an 802.11/WiFi wireless scanner and connection manager for 802.11 a/b/g/n networks. WiFi Scanner is an easy to use tool for designing, verifying,.

If you've followed the steps to connect your Mac to a Wi-Fi network, but the connection to your network or the Internet isn't reliable, the steps in this article might help.

Check for Wi-Fi recommendations

When your Mac tries to connect to a Wi-Fi network, it checks for issues that affect its ability to create a fast, stable, and secure connection. If an issue is detected, the Wi-Fi status menu in the menu bar shows a new item: Wi-Fi Recommendations. Choose it to see recommended solutions.

Wi-Fi recommendations are available in macOS Sierra or later.

Analyze your wireless environment

Your Mac can use Wireless Diagnostics to perform additional analysis.

  1. Quit any apps that are open, and connect to your Wi-Fi network, if possible.
  2. Press and hold Option (Alt) ⌥ key, then choose Open Wireless Diagnostics from the Wi-Fi status menu .
  3. Enter your administrator name and password when prompted.

Wireless Diagnostics begins analyzing your wireless environment:

If the issue is intermittent, you can choose to monitor your Wi-Fi connection:


When you're ready to see recommendations, continue to the summary. Wireless Diagnostics asks for optional information about your base station or other router, so that it can include that in the report it saves to your Mac.

Click the info button next to each item in the summary to see details about that item. Wi-Fi best practices are tips that apply to most Wi-Fi networks.

App


Back up or make note of your network or router settings before changing them based on these recommendations—in case you need to use those settings again.

Monitor your Wi-Fi connection

Your Mac can monitor your Wi-Fi connection for intermittent issues, such as dropped connections. Follow the steps to analyze your wireless environment, but choose ”Monitor my Wi-Fi connection” when prompted.

During monitoring, a window shows that monitoring is in progress. Monitoring continues as long as this window is open and you're on the same Wi-Fi network, even when your Mac is asleep.

If Wireless Diagnostics finds an issue, it stops monitoring and shows a brief description of the issue. You can then resume monitoring or continue to the summary for details and recommendations.

Create a diagnostics report

Wireless Diagnostics automatically saves a diagnostics report before it displays its summary. You can create the same report at any time: press and hold the Option key, then choose Create Diagnostics Report from the Wi-Fi status menu . It can take your Mac several minutes to create the report.

  • macOS Sierra and later saves the report to the /var/tmp folder of your startup drive, then opens that folder for you.
    To open the folder manually, choose Go > Go to Folder from the Finder menu bar, then enter /var/tmp.
  • OS X El Capitan or earlier saves the report to your desktop.

The report is a compressed file with a name that begins “WirelessDiagnostics.” It contains many files that describe your wireless environment in detail. A network specialist can examine them for further analysis.

Use other diagnostics utilities

Wireless Diagnostics includes additional utilities for network specialists. Open them from the Window menu in the Wireless Diagnostics menu bar:

  • Info gathers key details about your current network connections.
  • Logs enables background logging for Wi-Fi and other system components. The result is saved to a .log file in the diagnostics report location on your Mac. Logging continues even when you quit the app or restart your Mac, so remember to disable logging when you're done.
  • Scan finds Wi-Fi routers in your environment and gathers key details about them.
  • Performance uses live graphs to show the performance of your Wi-Fi connection:
    • Rate shows the transmit rate over time in megabits per second.
    • Quality shows the signal-to-noise ratio over time. When the quality is too low, your device disconnects from the Wi-Fi router. Factors that affect quality include the distance between your device and the router, and objects such as walls that impede the signal from your router. Learn more.
    • Signal shows both signal (RSSI) and noise measurements over time. You want RSSI to be high and noise to be low, so the bigger the gap between RSSI and noise, the better.
  • Sniffer captures traffic on your Wi-Fi connection, which can be useful when diagnosing a reproducible issue. Select a channel and width, then click Start to begin capturing traffic on that channel. When you click Stop, a .wcap file is saved to the diagnostics report location on your Mac.

Learn more

App To Continuously Scan Wifi Mac 2019

Additional recommendations for best Wi-Fi performance:

  • Keep your router up to date. For AirPort Time Capsule, AirPort Extreme, or AirPort Express Base Station, check for the latest firmware using AirPort Utility. For non-Apple routers, check the manufacturer's website.
  • Set up your router using Apple's recommended settings, and make sure that all Wi–Fi routers on the same network use similar settings. If you're using a dual-band Wi-Fi router, make sure that both bands use the same network name.
  • Learn about potential sources of Wi-Fi and Bluetooth interference.

Learn about other ways to connect to the Internet.

WifiInfoView v2.61
Copyright (c) 2012 - 2020 Nir Sofer

See Also

  • Wifi Collector - Collect wireless networks information and their location on Android device.
  • NK2Edit - Edit, merge and fix the AutoComplete files (.NK2) of Microsoft Outlook.

Description

WifiInfoView scans the wireless networks in your area and displays extensive information about them, including:Network Name (SSID), MAC Address, PHY Type (802.11g or 802.11n), RSSI, Signal Quality, Frequency, Channel Number, Maximum Speed, Company Name, Router Model and Router Name (Only for routers that provides this information), and more...

App To Continuously Scan Wifi Mac 2019 Mac


When you select a wireless network in the upper pane of this tool, the lower pane displays the Wi-Fi information elements received from this device, in hexadecimal format.
WifiInfoView also has a summary mode, which displays a summary of all detected wireless networks, grouped by channel number, company that manufactured the router, PHY type, or the maximum speed.

System Requirements

  • Operating System: This utility works on Windows Vista, Windows 7, Windows 8, Windows Server 2008, and Windows 10.Both 32-bit and x64 systems are supported.
    Windows XP is not supported because this tool is based on new Wi-Fi API that doesn't exist on Windows XP.If you want to get wireless networks information on Windows XP, you can use the WirelessNetView utility.
  • Wireless network adapter and wireless card driver that works with the built-in wireless support of Windows Vista/7/8/2008. If you don't have a compatible wireless adapter and driver, 'cannot find wireless adapter' error will be displayed.
  • In order to watch 5GHz wireless networks, you have to use a wireless network adapter that supports 5 GHz channels.

Versions History

  • Version 2.61:
    • Updated the internal MAC addresses file.
  • Version 2.60:
    • Added option to create a shortcut on your desktop that connects to the desired access point.
    • There are 2 types of shortcut you can create - 'Connect Access Point By BSSID' and 'Connect Access Point By Name'.
  • Version 2.55:
    • Added 'Connect Selected Access Point' option. This option allows you to connect your access point from the window of WifiInfoView.
    • If you have multiple access points with the same name (Wifi Extenders), you can choose a specific AP to connect.
    • Added /ConnectAP command-line option, which allows you to connect to the desired access point , by specifying network name (SSID) and MAC address (BSSID),for example:
      WifiInfoView.exe /ConnectAP 'MyNet' '00-25-9C-14-2C-39'
  • Version 2.50:
    • Added 'Mark Connected Access Point'. When it's turned on, the connected access point is marked with green color.
  • Version 2.47:
    • Updated the internal MAC addresses file.
  • Version 2.46:
    • Fixed the save command-line option to work according to the selected display mode (/DisplayMode command-line option).
  • Version 2.45:
    • Added 'Restart Windows Wireless Service' option (Under the Help menu)
  • Version 2.42:
    • Fixed bug: When the SSID of the device updated, WifiInfoView dispalyed incorrect SSID string.
    • Updated the internal MAC addresses file.
  • Version 2.41:
    • You can now send the data to stdout by specifying empty string as filename, for example:
      WifiInfoView.exe /scomma ' more
  • Version 2.40:
    • Added option to filter by signal quality (In 'Advanced Options' window).
  • Version 2.34:
    • Fixed issue: WifiInfoView displayed incorrect channel width for 802.11ac networks.
  • Version 2.33:
    • Added 'Country Code' column (For access points with 802.11d support).
  • Version 2.32:
    • Added option to save as JSON file.
  • Version 2.31:
    • Updated the internal MAC addresses file.
  • Version 2.30:
    • Added 'MAC Addresses List' option (Ctrl+F8), which allows you to create a list of MAC addresses and their description.The description specified in this list will be displayed under the 'Description' column.The MAC addresses list is saved in 'WifiInfoView_MAC_List.txt' located in the same folder of WifiInfoView.exe
  • Version 2.27:
    • Added description text for all types of information elements (Displayed in the lower pane).
  • Version 2.26:
    • Fixed bug: The filtering in the 'Advanced Options' window didn't affect the output of the command-line options ( /scomma, /shtml and others)
    • In 'Advanced Options' window - You can now also filter by SSID in addition to the BSSID filtering.
    • Added 'Select All' and 'Deselect All' to the 'Column Settings' window.
  • Version 2.25:
    • Added 'Stations Count' column (Available only for APs with 'BSS Load' information): Specifies the number of wifi clients associated with the access point.
    • Added 'Channel Utilization' column (Available only for APs with 'BSS Load' information): Specifies the % of time that the channel is busy.
  • Version 2.21:
    • Fixed the lower pane to switch focus when pressing tab key.
  • Version 2.20:
    • Added 'Connected' column - Displays 'Yes' if you are connected to this network.
  • Version 2.15:
    • Added '802.11 Standards' column, which displays the 802.11 Standards that the access point supports:802.11d, 802.11e, 802.11h, 802.11i, 802.11k, 802.11r, and more...
    • The 'PHY Type' now displays multiple phy types (e.g: 802.11g/n, 802.11n/ac).
  • Version 2.10:
    • Added new option to 'Advanced Options' window: Show only the specified BSSIDs (Comma-delimited list).
  • Version 2.08:
    • The connection name is now displayed in the adapters list of 'Advanced Options' window.
  • Version 2.07:
    • Updated the internal MAC addresses file.
  • Version 2.06:
    • Added 'Align Numeric Columns To Right' option.
  • Version 2.05:
    • Added option to show only networks in the specified channels (In 'Advanced Options' window).
  • Version 2.00:
    • Added option to display only networks detected in the last xx seconds (In 'Advanced Options' window).
    • Added 'Show only networks with detection count higher than...' option (In 'Advanced Options' window).
  • Version 1.97:
    • Added 'Save All Items'.
  • Version 1.96:
    • Updated the internal MAC addresses file.
  • Version 1.95:
    • Added 'Affected Channels' summary mode, which shows the number of networks that affect every channel, according to the 'Channels Range' column.
  • Version 1.90:
    • Added 'Channel Width' column, in MHz.
    • Added 'Channels Range' column, which shows the actual range of channels that the wireless network uses (according to the channel width).
  • Version 1.86:
    • Updated the internal MAC addresses file.
  • Version 1.85:
    • Added 'Minimum Signal Quality' and 'Maximum Signal Quality' columns to the 'Full Details Mode'.
  • Version 1.81:
    • Added 'Put Icon On Tray' option.
  • Version 1.80:
    • Fixed WifiInfoView to calculate the maximum speed of 802.11ac networks.
  • Version 1.79:
    • WifiInfoView now displays 'Cannot find wireless adapter !' message in the bottom status bar when there is no wireless adapter...
  • Version 1.78:
    • The current display mode is now added to the window title.
  • Version 1.77:
    • Added 'Next Display Mode' (Ctrl+1) and 'Previous Display Mode' (Ctrl+2) options to easily switch between modes.
  • Version 1.76:
    • Fixed bug: WifiInfoView failed to remember the last size/position of the main window if it was not located in the primary monitor.
    • Updated the internal MAC addresses file.
  • Version 1.75:
    • Added new summary mode - Company-Router Model
  • Version 1.70:
    • Added new command-line options: /DisplayMode , /UseOnlyAdapter , /NetworkAdapter, and more.
  • Version 1.65:
    • Added 'WPS Summary Mode'.
  • Version 1.61:
    • Added secondary sorting support: You can now get a secondary sorting, by holding down the shift key while clicking the column header.Be aware that you only have to hold down the shift key when clicking the second/third/fourth column. To sort the first column you should not hold down the Shift key.
  • Version 1.60:
    • Added 'Percent' column to the summary mode.
  • Version 1.56:
    • Fixed the command-line scan (added on version 1.50) to wait until the scan is completed.
    • Added /NumberOfScans command-line option, which allows you to scan multiple times from command-line, in order to get a better result, for example:
      WifiInfoView.exe /NumberOfScans 5 /scomma c:tempwscan.csv
  • Version 1.55:
    • Added 'Start Time' column, which displays the last time that access point was possibly started/restarted/rebooted. Be aware that some access points reset their timestamp periodically without restart/reboot action, and thus for these APs, the time value dislayed on this column doesn'trepresent the correct start time.
    • The 'WPS Support' column now displays the WPS status - Configured, Not Configured, or Locked.
  • Version 1.50:
    • Added command-line options to export the wireless networks list into a file.
  • Version 1.45:
    • The 'Security' column now displays the security mode of the network - WEP, WPA-PSK, WPA2-PSK, and so on.... (Instead of Yes/No)
    • Added Security Summary Mode.
    • The 'Cipher' column now displays more accurate information. (Added TKIP+CCMP value)
    • Updated the internal MAC addresses file.
  • Version 1.40:
    • Added 'Copy MAC Addresses' option (Ctrl+M)
    • Added 'Show Lower Pane' option (Under the View menu). You can turn it off if you don't need the lower pane.
  • Version 1.36:
    • WifiInfoView now detects 802.11ac networks (according to the 'VHT Capabilities' and 'VHT Operation' information elements)
  • Version 1.35:
    • Added 'Cipher' column.
    • Added 'WPS Support' column.
  • Version 1.30:
    • Added 'Average Signal Quality' column.
    • Added 'Advanced Options' window (F9), which allows you to choose the wireless network adapter that will be used to scan the wireless networks.This option is useful if you have multiple wireless network adapters.
    • Added 'Clear Networks List' option.
  • Version 1.26:
    • Added /cfg command-line option, which instructs WifiInfoView to use a config file in another location instead if the default config file, for example:
      WifiInfoView.exe /cfg '%AppData%WifiInfoView.cfg'
  • Version 1.25:
    • Added BSS Type Summary Mode.
  • Version 1.20:
    • Added 'Automatically Scroll Down On New Item' option.
  • Version 1.18:
    • Added 'BSS Type' column - Infrastructure or Ad-Hoc.
    • Fixed the flickering while scrolling the wireless networks list.
  • Version 1.17:
    • Added 'Select Another Font' option, which allows you to choose a font (name and size) to use on the main window.
  • Version 1.16:
    • Added 'Sort On Every Update' option.
  • Version 1.15:
    • Updated the internal MAC addresses file.
    • Added 'Mark Odd/Even Rows' option, under the View menu. When it's turned on, the odd and even rows are displayed in different color, to make it easier to read a single line.
  • Version 1.10:
    • Added new summary mode: Signal Quality.
  • Version 1.05:
    • Added 2 new summary modes - Router Name and Router Model.
  • Version 1.00 - First release.

Start Using WifiInfoView

WifiInfoView doesn't require any installation process or additional dll files. In order to start using it,simply run the executable file - WifiInfoView.exe

After you run WifiInfoView, the list of detected wireless networks in your area is displayed on the upper pane and it's updated atvery high rate. You can change update rate from Options->Update Rate menu.
When you select one or more wireless networks in the upper pane, the lower pane displays the Wi-Fi information elementsof the selected items, in hexadecimal format.

Columns In the Upper Pane

  • SSID: The name of the network.
  • MAC Address: MAC address of the router.
  • PHY Type: The PHY type for this network - 802.11a, 802.11g, 802.11n, or High-Rate DSSS
  • RSSI: The received signal strength indicator value, in units of decibels referenced to 1.0 milliwatts (dBm), as detected by the wireless LAN interface driver for the AP or peer station.
  • Signal Quality: A number between 0 and 100 that represents the quality of the signal.
  • Frequency: The channel center frequency of the band on which the 802.11 Beacon or Probe Response frame was received. The value of this column is in units of Gigahertz (GHz).
  • Channel: Channel number used by this wireless network.
  • Information Size:The total size (in bytes) of all Wi-Fi information elements received from this wireless network.
  • Elements Count: The total number of Wi-Fi information elements received from this wireless network.
  • Company: The company that manufactured the router, according to the 3 first bytes of the MAC address.
  • Router Model: The model of the router. This value is displayed only for routers that provide this information inside the Wi-Fi information elements.
  • Router Name: The name of the router. This value is displayed only for routers that provide this information inside the Wi-Fi information elements.
  • Security: Specifies whether the network is secured (Yes/No).
  • Maximum Speed: The maximum speed (in Mbps) that you can get when connecting to this wireless network.
  • First Detection: The first date/time that this network was detected.
  • Last Detection: The last date/time that this network was detected.
  • Detection Count: The number of times that this network was detected.

Summary Modes

When you switch to one of the summary modes, instead of showing the list of all networks, WifiInfoView only shows the number of networks and the average/minimum/maximum of the signal quality for every group.

For example, in the above screenshot, you can see that there are 25 wireless networks that use channel 6, 10wireless networks that use channel 11, and so on....

In the example below, you can see the there are 9 wireless routers of NETGEAR, 8 wireless routers of Sagemcom, and so on... (Be aware that some companies may appear more than once, with a little different name)

The following summary modes are available under the Options menu:Channels Summary Mode, Companies Summary Mode, PHY Types Summary Mode, and Max Speed Summary Mode

The 'Company' Column

WifiInfoView allows you to view the company name of each wireless device.The company name is determined according to the MAC address.

By default, WifiInfoView uses an internal database of MAC addresses/companies which is updated from time to time. If you want to use the most updated database, you can download it from the following link, and put in the same folderof WifiInfoView.exe:http://standards-oui.ieee.org/oui.txt
Be aware that you must save it as 'oui.txt'

Connect Selected Access Point

The 'Connect Selected Access Point' option (F2) allows you to connect to the desired access point from the main window of WifiInfoView.This feature is especially useful if you have multiple access points with the same name, because WifiInfoView allows you choose the access point to connect., as opposed to the default wifi manager of Windows, which makes the connection according to the network name.

Command-Line Options

{Profile Name} - The name of the profile that contain the network key to connect the network. If the profile is not specified, WifiInfoView will try to find the right profile automatically.
{Network Adapter} - This parameter is needed only if you have multiple wireless network adapters. You can specify the GUID of the network adapter orpart of the network adapter name. For example, if the network adapter name is 'Edimax AC600 Wireless LAN USB Adapter', you can specify the name as 'Edimax AC600'.

Here's some examples:
WifiInfoView.exe /ConnectAP 'MyNet' '00-25-9C-14-2C-39'
WifiInfoView.exe /ConnectAP 'MyNet'
WifiInfoView.exe /ConnectAP 'MyNet' '00259C142C39' MyNetProfile
WifiInfoView.exe /ConnectAP 'MyNet' '00-25-9C-14-2C-39' ' 'Edimax AC600'
WifiInfoView.exe /ConnectAP 'MyNet' '00-25-9C-14-2C-39' MyNetProfile '{F340052F-E512-38C0-B9A9-A21D723BD7CE}'

WifiInfoView.exe /cfg '%AppData%WifiInfoView.cfg'
/stext <Filename>Save the list of wireless networks into a regular text file.
/scomma <Filename>Save the list of wireless networks into a comma-delimited text file (csv).
/shtml <Filename>Save the list of wireless networks into HTML file (Horizontal).
/sxml <Filename>Save the list of wireless networks into XML file.
/sort <column>This command-line option can be used with other save options for sorting by the desired column.If you don't specify this option, the list is sorted according to the last sort that you made from the user interface.The <column> parameter can specify the column index (0 for the first column, 1 for the second column, and so on) orthe name of the column, like 'SSID' and 'RSSI'.You can specify the '~' prefix character (e.g: '~SSID') if you want to sort in descending order.You can put multiple /sort in the command-line if you want to sort by multiple columns.

Examples:
WifiInfoView.exe /shtml 'd:tempwifi.html' /sort 2 /sort ~1
WifiInfoView.exe /scomma 'd:tempwifi.html' /sort '~Security' /sort 'SSID'

/UseOnlyAdapter <0 1>Specifies whether to use only the desired network adapter. 0 = No, 1 = Yes.
/MacAddressFormat <1 - 3>Specifies the MAC address format.1 = XX-XX-XX-XX-XX-XX, 2 = XX:XX:XX:XX:XX:XX, 3 = XXXXXXXXXXXX.
/UpdateRate <1 - 4>Specifies the update rate:1- Low, 2 - Medium, 3 - High, 4 - Very High.

For all save command-line options, you can specify empty filename in order to send the data to stdout, for example:
WifiInfoView.exe /scomma ' more

Translating WifiInfoView to other languages

In order to translate WifiInfoView to other language, follow the instructions below:
  1. Run WifiInfoView with /savelangfile parameter:
    WifiInfoView.exe /savelangfile
    A file named WifiInfoView_lng.ini will be created in the folder of WifiInfoView utility.
  2. Open the created language file in Notepad or in any other text editor.
  3. Translate all string entries to the desired language.Optionally, you can also add your name and/or a link to your Web site. (TranslatorName and TranslatorURL values) If you add this information, it'll be used in the 'About' window.
  4. After you finish the translation, Run WifiInfoView, and all translated strings will be loaded from the language file.
    If you want to run WifiInfoView without the translation, simply rename the language file, or move it to another folder.

License

App To Continuously Scan Wifi Mac 2019 Reviews

This utility is released as freeware. You are allowed to freely distribute this utility via floppy disk, CD-ROM, Internet, or in any other way, as long as you don't charge anything for this and you don'tsell it or distribute it as a part of commercial product. If you distribute this utility, you must include all files inthe distribution package, without any modification !

Disclaimer

The software is provided 'AS IS' without any warranty, either expressed or implied,including, but not limited to, the implied warranties of merchantability and fitnessfor a particular purpose. The author will not be liable for any special, incidental,consequential or indirect damages due to loss of data or any other reason.

Feedback

If you have any problem, suggestion, comment, or you found a bug in my utility, you can send a message to [email protected]

App To Continuously Scan Wifi Mac 2019 Download

Download WifiInfoView

App To Continuously Scan Wifi Mac 2019 Free

WifiInfoView is also available in other languages. In order to change the language of WifiInfoView, download the appropriate language zip file, extract the 'wifiinfoview_lng.ini', and put it in the same folder that you Installed WifiInfoView utility.

LanguageTranslated ByDateVersion
ArabicMohamed.Bajdouai20/05/2015WifiInfoView v1.80
Brazilian PortuguesePaulo Guzmán20/09/20182.40
Brazilian PortugueseMCHAL06/11/20121.10
CzechJan Sinko30/11/20182.41
DanishDennis Kamp31/07/20141.65
DutchJan Verheijen29/06/20202.61
FrenchGilles PEDROLI/Largo04/09/20182.40
FrenchfreMea09/08/20151.85
FrenchSkorpix38 (sept 2018)10/10/20182.40
German«Latino» auf WinTotal.de29/06/20202.61
GreekΘανάσης Κατσαγεώργης11/09/20121.00
HungarianGasparics Sándor14/11/20121.10
ItalianAndrea Carli04/01/20202.60
ItalianFERRUCCIO (TO)25/01/20192.42
JapaneseiLEƒÖEj14/04/20151.79
PolishHightower03/01/20202.60
RomanianJaff (Oprea Nicolae)06/02/20161.96
RussianDmitry Yerokhin03/01/20202.60
Simplified ChineseAsx、locationiskey06/03/20172.20
Simplified ChineseKirk09/01/20202.60
Simplified Chinese李柏均 (Localized by Bojun Li)06/10/20131.26
SlovakFrantišek Fico06/07/20202.61
SpanishJulio Rey26/12/20131.26
SpanishKiketrucker25/04/20192.45
SwedishI.K.l14/10/20172.30
Traditional ChineseDanfong Hsieh03/01/20202.60
ThaiHS3PLN และ WiFi.ในฝัน.com29/01/20131.10
TurkishYücel Temel14/02/20202.60
VietnameseHai Hoang29/07/20172.26